Peppers接管式防爆格蘭（A*RCC系列）基本介紹
英國Peppers公司專業(yè)生產和銷售防爆格蘭，防爆變徑，防爆堵頭，防爆呼吸閥等防爆連接配套產品。
Peppers接管式防爆格蘭（A*RCC系列）性能特點
產品廣泛應用于電氣危險區(qū)域，石油石化，防爆電機，防爆電控箱，防爆燈具，防爆馬達，核電等項目及領域。
Peppers接管式防爆格蘭（A*RCC系列）技術參數
Cable Gland Type A*RCC
(Single Compression Gland featuring a Freely Rotating Flexible metallic Conduit Connector）
“A*RCC” type glands are certified Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR and Dust Protected Ex ta.
They are suitable for use in Zone 1 and 2 for Gas Groups IIA, IIB and IIC and additionally for use in Zones 20, 21 and 22 for Dust
Groups IIIA, IIIB and IIIC. Commonly referred to as “stuffing glands”, they provide a controlled pull resistant environmental
displacement seal on the cable outer sheath, minimising damage to cables that exhibit “cold flow” characteristics. The gland
maintains IP66 & IP68 to 50 metres. It is supplied with an IP O-ring seal as standard on metric entry threads. The gland features
a freely rotating flexible conduit connection.

Peppers接管式防爆格蘭（A*RCC系列）使用說明
Materials: Aluminium, Brass or Stainless Steel SS316L
Example Part Numbering (See below for details)
A2RCCBF/NP/20-1/M20

Peppers接管式防爆格蘭（A*RCC系列）采購須知
Gland size does not necessarily equate to the entry thread size.
The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.
Dimensions (A) & (B) may differ for glands with non metric entry threads. Please refer to our “Thread Reference Tables” for specific dimensions.
Assembly instructions must be read prior to installation and adhered to in full.
Peppers supplies cable glands with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1
and other equivalent standards. They usually incorporate a thread run out according to the available machining techniques and will not
have a full form thread for the entire length. Peppers Cable Glands Limited will not be held responsible for clients’ installations where
this has not been taken into account.
When selecting IP Washer material for gland kits, please be aware of the accessories temperature range to ensure they are suitable for
the intended installation. Where approval in addition to ATEX and IECEx is required, this must be clearly requested at time of enquiry / order.
It is the installer’s responsibility to ensure that the flexible conduit is secured correctly.
If fit testing is required for specific conduit please contact Peppers(上海頤品自動化).
電工電氣 » 配電輸電設備，上海頤品自動化科技有限公司主要代理分銷電工電氣線纜保護產品及附件，
CMP，Hawke，CCG，Peppers防爆格蘭，REIKU尼龍軟管，Anamet金屬軟管，Boxco電氣接線盒
Peppers接管式防爆格蘭（ARCC系列） Peppers非鎧接管型防爆格蘭（A*RCC系列） ComplianceStandards:EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31 IEC 60079-0, IEC 60079-1, IEC 60079-7,
IEC 60079-31 & IEC 60529 C22.2 (see certificate), CAN.CSA 60079-0/1/7 UL514B, UL1203, UL2225, UL50E, ANSI/UL 60079-0/7, ISA 60079-31
Certification: ATEX，IECEx，CEC - Canada，NEC - USA，EAC INMETRO - Brazil，SAC-China，UKRAINE，CCoE - India，ABS LLOYD’S，RMRS，
Certificate No. ATEX，IECEx，CEC - Canada
NEC-USA，EAC，INMETRO-Brazil，SAC-China，UKRAINE CCoE - India，ABS，LLOYD’S，RMRS II 1D 2G Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da，
II 3G Ex nR IIC Gc Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da Class I Zone 1 Ex d IIC / Ex e II Class I Division 2, Groups A, B, C & D Class II Division 1, Groups
E, F & G Class III, Enclosure Type 4X Class I Zone 1 AEx e IIC Gb / Class II Zone 20 AEx ta IIIC Da Class II Division 1, Groups E, F & G Class III, Enclosure
Type 4X Exd IICU / Exe IIU / ExnR IIU，Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da Ex d IIC / Ex e IIC，Ex d IIC X / Ex e II X，Petroleum Rules 2002 (PESO)
Specified ABS Rule，Enclosure Systems (Part 1B) Part XI of RS Rules for the classification & construction ofsea-going ships (ed. 2014) SIRA 01ATEX1271X
& SIRA 09ATEX1221X，IECEx SIR 07.0097X CSA 1356011，CSA 2627370，RUC-GB.ГБ06.В.00098，NCC 13.2186 X NEPSI GYJ16.1400X，UA.TR.047.C.0408-13 & 2937
PESO P365300/2 & P365300/13，14-LD463991-1-PDA 10/00056(E1)，14.02755.315 IP66 & IP68 (50 metres - 7 days), Type 4X
Neoprene Seals -35°C to +90°C / Silicone Seals -60°C to +180°C Aluminium, Brass or Stainless Steel Electroless Nickel

?